7.7.4.24 Pset_VesselLineCommon
7.7.4.24.1 Semantic definition
Properties for vessel lines and anchoring
7.7.4.24.2 Applicable entities
7.7.4.24.3 Properties
| Name | Property Type | Data Type | Description | |
|---|---|---|---|---|
| LineIdentifier | IfcPropertySingleValue | IfcIdentifier |
Reference ID relative to a design vessel in the project. |
|
| MidshipToFairLead | IfcPropertySingleValue | IfcLengthMeasure |
Distance from the vessel midship to the fairlead for the line. |
|
| CentreLineToFairlead | IfcPropertySingleValue | IfcLengthMeasure |
Distance from the vessel centreline to the fairlead for the line. |
|
| HeightAboveMainDeck | IfcPropertySingleValue | IfcLengthMeasure |
Height of the fairlead above the main deck of the vessel. |
|
| FairleadToTermination | IfcPropertySingleValue | IfcLengthMeasure |
Distance from the fairlead to the bitt or winch on the vessel where the line terminates. |
|
| WinchBreakLimit | IfcPropertySingleValue | IfcForceMeasure |
Line force at which the winch starts to release the line (maximum load). |
|
| PreTensionAim | IfcPropertySingleValue | IfcForceMeasure |
Line force that the winch is set to maintain (minimum load). |
|
| LineType | IfcPropertySingleValue | IfcLabel |
Mooring line type. |
|
| LineStrength | IfcPropertySingleValue | IfcForceMeasure |
Breaking load of the line (note that ultimate stress is not part of any of the material Psets). |
|
| TailLength | IfcPropertySingleValue | IfcPositiveLengthMeasure |
Length of the tail. |
|
| TailDiameter | IfcPropertySingleValue | IfcPositiveLengthMeasure |
Diameter of the tail. |
|
| TailType | IfcPropertySingleValue | IfcLabel |
Mooring tail type. |
|
| TailStrength | IfcPropertySingleValue | IfcForceMeasure |
Breaking load of the tail (note that ultimate stress is not part of any of the material Psets). |
