This enumeration defines the different predefined types of beams that can further specify an IfcBeam or IfcBeamType.
{ .change-ifc2x4}
6.1.2.1.2 Type values
Type
Description
BEAM
A standard beam usually used horizontally.
CORNICE
A non-loadbearing beam on the longitudinal edge of bridge slab, usually encasing installations.
DIAPHRAGM
End portion of a girder transmitting loads to supports and providing moment resistance to adjoining segment.
EDGEBEAM
A beam on the longitudinal edge of bridge slab, usually concrete, providing additional stiffening and protection from the elements.
GIRDER_SEGMENT
A segment of a girder (e.g. each span of a continuous girder).
HATSTONE
A beam on top of a retaining wall or a wing wall, preventing earth movement.
HOLLOWCORE
A wide often prestressed beam with a hollow-core profile that usually serves as a slab component.
JOIST
A beam used to support a floor or ceiling.
LINTEL
A beam or horizontal piece of material over an opening (e.g. door, window).
PIERCAP
A transversal beam on top of a pier (on a single column or extending from one column of a pier to another column of the same pier).
SPANDREL
A tall beam placed on the facade of a building. One tall side is usually finished to provide the exterior of the building. Can be used to support joists or slab elements on its interior side.
T_BEAM
A beam that forms part of a slab construction and acts together with the slab which it carries. Such beams are often of T-shape (therefore the English name), but may have other shapes as well, e.g. an L-Shape or an Inverted-T-Shape.
4 contributor(s):
Last change: Improve definition split (#876)
* bring back headers
headers were previously removed by mistake, now bringing them back
* add new lines and rename the tag
add the word 'short' in it
* unify newlines
make exactly one newline before and two after the tag
* resolving typos
Because bringing back headers required to go back in time to previous version, I'm now re-resolving the issues: #861, #860, #856 by ArturTomczak on 2024-07-16T16:07:28+02:00
Is this page difficult to understand? Let us know!